Click image to view full size image
1. Main Composition
Methylpolysilicone resin
2. Typical Physical Properties
|
Property |
Result |
Apperance |
Light yellow or red brown liquid, opalescence is permitted, no mechanical impurity |
Solid Content (150℃, 2h, %) |
50±1 |
Viscosity (25℃,S) No less than |
≥15 |
Drying Time (200℃, M) |
1-20 Minutes |
3. Performance and use
Silibase-18041 Methylphenyl Silicon Resinhas fine high temperature resistance, electrical insulation and moisture proof property. Silibase-18041 Methylphenyl Silicon Resin is suitable for the production of the binding material for the glass cloth laminated board and molding compound, insulating material for H level engine and other electrical equipments.
4. Packing & Storage & Transportation
Silibase-18041 Methylphenyl Silicon Resin should be stored in dry and clean 200kg iron drum and seal-packing under 35℃, without direct sunlight and be away from heat. Silibase-18041 Methylphenyl Silicon Resin should be transported as inflammable.
Remark:
Above text instructions, suggestions and data are from our sincerity but real environment for the use of this product are beyond the control by our Silibase Silicone Company. So before using Silibase-58205 Methyl Silicone Resin, users have the responsibility to be tested to determine whether it meets your requirements and find out the optimum dosage.
E-mail: